Totaalleverancier voor grootformaat printoplossingen

NL : +31 (0)76 820 08 30 | Belux : +32 (0)89/46.05.60

Featured Image - Experiences with the D-Line P8181 - Easy Glide

Experiences with the D-Line P8181 - Easy Glide

The D-Line P8181 - Easy Glide is a premium, white cast, print film. The film has gray Easyglide adhesive with air channels, making it extra easy to work with when wrapping a car.

Description

What is the product.

The D-Line P8181 - Easy Glide is a premium, white cast, print film. The film has gray Easyglide adhesive with air channels, making it extra easy to work with when wrapping a car. The material is specifically for use with a Solvent printer (eco/mild/hard), latex printers and UV printers.

The initial tack of the product is lowered, but is independent of the subsequent optimal adhesive strength (which is even higher than with a regular permanent adhesive). The lower tack has the characteristic of making it very easy to position the product on the substrate. Once hard pressed, heated and fixed by 90 degree heating, this film is in a perfect position to be guaranteed to stay in place for 10 years.

We asked users what they think are the advantages of this unique film:

Zekria Samad - The Signmaker

"The Easy Glide print film works very nicely and you can go in any direction with it. Because the film slides (glides) easily over the surface, you can reposition often and easily. This makes wrapping a car easy to do even on your own. It saves you a lot of time!"
Examples of car wraps with EasyGlide:

Description

Advantages

  • Slides easily over the surface due to the special air channels, therefore you can reposition often;
  • Print/color stays good despite stretching and blow-drying. Very colorfast;
  • The PE liner also makes it somewhat thicker and more stable, making it easier to print on
  • HP Latex Certified;
  • The finish is nicer because it is quite thin material;
  • You can easily push bubbles away towards open ends;
  • Leaves no paint damage;
  • Approximately 10-year lifespan;
  • Easy to remove;
  • You can work super fast;
  • It saves you a lot of time and is therefore much more effective than other films.
Suzan de Vocht - Ketelaars Reklame
"I think the Easy Glide is the most ideal product for wrapping a car or bus. You can take off the protective sheet completely in one go and hang the print out in its entirety on the substrate. Because you can recover easily, this works very efficiently. Other films adhere or stick very quickly to the substrate, especially with large prints (for example, for a side of a bus) it is nice that you can easily reposition. This is all possible with Easy Glide. "

Are there any disadvantages?

  • You have to post-dry everything well to prevent air bubbles in zone exposures;
  • On a substrate with deep grooves, it sometimes comes off at those edges. So touch it up well!

Interested in the D-Line Easy Glide?

Check out the product here or contact us!