Yes, Mactac WallWrap 100 is designed for both indoor and outdoor applications. It offers outdoor durability of up to 5 years, depending on environmental conditions. This makes it ideal for medium-term outdoor advertising and architectural graphics on textured surfaces.

WallWrap 100 is specially designed for structured surfaces such as brick, concrete and stucco. For optimal adhesion, it is important that the surface is clean, dry and free of contaminants before application.

WallWrap 100 is compatible with solvent, eco-solvent, latex and UV inkjet printing technologies. This versatility provides vibrant, high-quality prints suitable for a variety of applications.

Although not required, it is recommended that WallWrap 100 be laminated with overlaminate from Mactac's LF 10700 series. This increases durability and provides protection against exposure to UV radiation, abrasion and environmental contaminants, giving the graphics long life.

During application, the film is heated with a heat gun and applied with a roller into the texture of the surface. Detailed application guidelines can be found in the technical data sheet.

Despite its high tack, WallWrap 100 is designed to be easier to remove than other films with high tack. This preserves the integrity of the underlying surface during removal.

WallWrap 100 is available in rolls 1370 mm wide and 25 m long. This size is suitable for covering large areas and can be easily trimmed to meet specific dimensions.

Yes, WallWrap 100 has a self-extinguishing fire rating when applied to aluminum panels, providing an additional level of safety in various applications.

WallWrap 100 is primarily designed for wall applications on textured surfaces. For floor graphics, it is advisable to use materials specifically designed for floor applications to ensure durability and safety.

To maintain quality, WallWrap 100 should be stored in its original packaging at temperatures between 15 and 25°C and a relative humidity of about 50%. Proper storage will keep the film in optimal condition for application.