Although designed primarily for indoor use with a durability of up to 3 years, WW Veneziano can also be used outdoors for short-term applications, with a lifetime of approximately 1 year under normal conditions.

WW Veneziano is compatible with solvent, eco-solvent, UV and latex printing technologies, ensuring flexibility and high-quality print results on a variety of platforms.

For optimal adhesion and visual effect, WW Veneziano is best applied to smooth, non-porous surfaces. Application on textured walls can affect adhesion and overall appearance.

The high tack adhesive is designed for strong, permanent adhesion. Removal may take effort and may damage delicate surfaces or leave residue. It is recommended to test a small area before full application.

Lamination is not necessary, but can be applied for extra protection against abrasion and exposure to UV radiation, especially in high traffic areas or environments with direct sunlight.

When installing multiple panels, a minimum overlap of 20 mm is recommended to ensure seamless coverage and adhesion between panels.

Make sure the surface is clean, dry and free of dust, grease or other contaminants. Thorough cleaning ensures better adhesion and longer application life.

Mactac WW Veneziano is primarily designed for indoor wall decoration on smooth surfaces. Although it has a strong adhesive, application in environments with high humidity, such as bathrooms, may affect performance. It is recommended to make sure the humidity level of the wall is below 65% relative humidity before application. For best results, test the film in the specific environment before large-scale application.

The use of a primer is not usually required for WW Veneziano; however, it is critical that the surface be smooth, clean and properly prepared for optimum adhesion. If the surface is porous or newly painted, sufficient curing time and possibly the use of a compatible primer can improve adhesion and durability.

The minimum application temperature for WW Veneziano is +10°C. Application of the film at or above this temperature ensures good adhesion and performance. It is also important to consider the operating temperature range of -20°C to +70°C for continued performance after application.