Mactac WW Leather is primarily designed for indoor use and offers a durability of up to 3 years. Although it can be used outdoors for short-term applications, prolonged exposure to external elements can affect its durability and performance.

This film is best suited for smooth, flat surfaces to ensure optimal adhesion and aesthetic appearance. Application to textured or uneven surfaces may affect the adhesion and overall appearance of the installation.

Mactac WW Leather is compatible with a variety of printing technologies, including solvent, eco-solvent, UV and latex printers. This compatibility provides flexibility and ease in producing high-quality, custom designs.

Because of its textured surface, Mactac WW Leather is not intended to be laminated. The film itself provides a durable and visually appealing finish without the need for additional lamination.

Proper surface preparation is critical to successful application. Make sure the surface is clean, dry and free of dust or contaminants. Clean the surface thoroughly with an appropriate detergent and a lint-free cloth to promote optimal adhesion.

Although Mactac WW Leather is designed for indoor use, performance may be compromised in high moisture environments such as bathrooms or kitchens. Excessive moisture can affect the adhesive bond and integrity of the film. It is advisable to test the film on a small area before full application in such environments to ensure the film meets your specific needs.

To maintain the appearance of Mactac WW Leather, gently clean the surface with a damp microfiber cloth and warm water. Avoid using solvents, detergents or harsh cleaning agents, as they may damage the surface of the film. Do not apply excessive pressure or abrasion during cleaning to preserve the texture and print quality.

Mactac WW Leather has a permanent adhesive with high tack designed for strong, long-term adhesion. This makes repositioning the film during installation challenging. It is crucial to properly align and position the film during application to achieve the desired result.

Removing Mactac WW Leather can be difficult because of its permanent adhesive. To facilitate removal, you can heat the film to soften the adhesive and then slowly remove the material in small pieces from top to bottom. Keep in mind that removal may result in damage to the underlying surface, such as delamination of paint or cracks in plaster.

In environments where exposure to chemicals, solvents or high-pressure water is expected, it is recommended that an edge sealant be used. This precaution helps prevent liquids from penetrating between the substrate and adhesive, improving the life and appearance of the installation.