Yes, Mactac WW Canvas can be used for short-term outdoor applications, with an expected service life of up to 1 year. Durability may vary depending on environmental factors such as exposure to sunlight and weather elements.

This wall foil is compatible with solvent, eco-solvent, UV and latex printing technologies, offering flexibility for different print setups and ensuring high-quality print results.

Mactac WW Canvas is designed for use on smooth, flat surfaces. Application to textured walls may affect the adhesion and overall appearance of the image. It is recommended to test a small area before full application to textured surfaces.

The high tack adhesive is intended for permanent applications. Although the adhesive adheres strongly, removal may require effort and possibly damage underlying surfaces. Keep this in mind when planning temporary installations.

Lamination is not required, but can provide additional protection against physical damage and exposure to UV radiation, which can extend the life of the graphics, especially in high-traffic areas or outdoor environments.

Make sure the wall surface is clean, dry and free of dust, grease or other contaminants. Proper preparation of the surface ensures better adhesion and longer life of the applied graphics.

Although it has good adhesion properties, prolonged exposure to high humidity can affect performance. It is advisable to test in such environments or contact the supplier for specific recommendations.

Yes, it has a fire rating of B-s2,d0 according to EN 13501-1, indicating limited flammability and low smoke production, making it suitable for use in public and commercial spaces that must meet fire safety standards.

Mactac WW Canvas is available in rolls 1.37 meters wide and 30 meters long.

Yes, Mactac WW Canvas is suitable for both temporary and medium-term installations. The adhesive strength provides a strong bond, while the thickness of the film allows it to be removed relatively easily if needed. However, for short-term applications, it is advisable to test the material on a small area to ensure it meets the specific requirements of your project.