Yes, Poli-Print 905 is designed for short-term outdoor applications with a durability of up to 4 years under Central European climate conditions. The permanent adhesive ensures reliable performance on a variety of outdoor surfaces.

Poli-Print 905 is best suited for flat and slightly curved surfaces. For applications with more complex curves or contours, a polymeric or cast film may be more suitable because of their greater conformability.

This film is compatible with eco-solvent, solvent, UV and latex printing technologies. Its resistance to solvent inks ensures high-quality print results on all these platforms.

Make sure the surface is clean, dry and free of dust, grease or other contaminants. Proper surface preparation promotes optimum adhesion and longevity of the applied images.

Although not required, laminating prints produced on Poli-Print 905 is recommended for applications that require long shelf life and protection from environmental factors such as UV exposure, moisture and physical abrasion. Lamination helps maintain print quality and extends the life of the images, especially in outdoor environments.

Poli-Print 905 features a permanent adhesive designed for long-term applications. Although it offers strong adhesion, removal can be challenging and potentially leave adhesive residue, especially if the product is used for an extended period of time. For applications where easy removal is expected, a test on a small area is recommended to assess the residue level.

When Poli-Print 905 is stored in its original packaging at approximately 22°C and 50-55% relative humidity, it has a shelf life of up to 2 years. Proper storage conditions help maintain the quality and performance characteristics of the film.

Yes, Poli-Print 905 has a B1 fire rating according to DIN 4102-1 when adhered to steel surfaces, which means it is flame-resistant. This makes it suitable for use in environments where fire safety standards are important.

Poli-Print 905 is designed primarily for applications on flat and slightly curved surfaces such as walls, windows and panels. It is not specifically designed for floor graphics and its use for such purposes may not produce optimal results. For floor graphics applications, consider materials specifically designed to resist foot traffic and provide slip resistance.

To maintain the properties of Poli-Print 905, store it in its original packaging at a temperature of about 22°C with 50-55% relative humidity. Avoid exposure to direct sunlight, extreme temperatures and humidity fluctuations to maintain the long-term quality of the film.