YupoTako UV XAD1069 uses microsuction echnology, with tiny suction cups on the back that create a vacuum seal when pressed against flat, smooth surfaces. As a result, it adheres securely without the need for traditional adhesive coatings.

Yes, the film is designed for multiple uses. If the micro-suction side gets dirty and loses adhesive strength, you can clean it with water to restore adhesive strength, so you can use the film multiple times.

YupoTako UV XAD1069 is primarily intended for indoor use. Although it is tear resistant and water resistant, prolonged exposure to outdoor elements may affect performance and service life.

The film is compatible with UV screen and UV digital printing technologies. It also works with HP Latex printers, specifically the L65500, LX600 and LX800 models. Limited printing capabilities exist with smaller Latex machines such as the L25500; pre-testing is recommended.

No, thanks to the adhesive-free micro suction cup, the film can be removed cleanly without leaving any sticky residue on the applied surface.

To maintain the quality of YupoTako UV XAD1069, store it in its original packaging, away from direct sunlight and at room temperature. Make sure the material is stored flat to avoid wrinkling, as it is highly sensitive and compressible. If rolling is necessary, use a core with a minimum diameter of 7.6 cm to avoid wrinkling. Proper storage of the material will preserve its microsuction properties and overall performance.

YupoTako UV XAD1069 is designed for application on flat, smooth surfaces. The microsuction technology may not adhere effectively on curved or uneven surfaces, resulting in reduced performance and possibly media release. For optimum results, apply the film to flat surfaces where full contact can be achieved.

Although YupoTako UV XAD1069 adheres well to many glass surfaces, caution should be exercised when applying to safety glass with thermal insulation properties, as it may cause the glass to shatter. Always test a small area before full application to ensure compatibility and safety.

If the microsuction side of YupoTako UV XAD1069 accumulates dust or dirt, the adhesive properties may weaken. To restore the adhesive properties, gently clean the surface with water and ensure that all contaminants are removed. Allow the film to dry completely before reapplying.

YupoTako UV XAD1069 is not suitable for application to uneven or curved surfaces, safety glass with thermal insulation, screens or for outdoor use such as vehicle decals. Applying the film to these surfaces may result in poor adhesion or possible damage.