Yes, Mactac WallWrap 300 is designed for medium-term outdoor applications with an expected service life of up to 4 years, depending on environmental conditions. For greater durability, the use of suitable laminates is recommended.

WallWrap 300 is optimized for flat and demanding surfaces. For highly textured surfaces, a test application is recommended to ensure sufficient adhesion.

WallWrap 300 is compatible with solvent, eco-solvent, UV and latex inkjet printing technologies, offering flexibility in production and ensuring high-quality print results.

For optimal protection and durability, laminating WallWrap 300 is recommended, especially for floor graphics or areas sensitive to physical contact. Mactac offers a range of laminates suitable for different finishes and applications.

The minimum application temperature for WallWrap 300 is +10°C. Ensuring that the surface and environment meet this temperature will promote good adhesion.

WallWrap 300 should be stored in its original packaging at temperatures between 15°C and 25°C and a relative humidity of about 50%. Under these conditions, the shelf life is up to 1 year.

Yes, WallWrap 300 has a fire certification of B-s1, d0 according to EN 13501-1, indicating low flammability and low smoke production.

Yes, WallWrap 300 can be used for floor graphics in combination with suitable laminates that offer slip resistance, ensuring safety and durability in high-traffic areas.

The gray adhesive improves film opacity, prevents see-through of underlying surfaces and ensures that printed images look vibrant and colorfast.