ASLAN SparkleColor SC 123 is primarily designed for indoor applications and offers a lifetime of up to 10 years when used indoors. Although it can be used outdoors for short-term applications, prolonged exposure to moisture and frost can reduce the glitter effect. Therefore, for long-term outdoor use, alternative solutions may be more appropriate.

ASLAN SparkleColor SC 123 is best suited for smooth, flat surfaces. Application to curved or uneven surfaces may result in adhesion problems or an uneven appearance. For curved applications, it is recommended to test on a small area before full application.

Gently clean the film with a soft, damp cloth to keep it sparkling. Avoid abrasives or harsh chemicals, as these can damage the glitter surface. Regular and gentle cleaning helps maintain its aesthetic appeal.

ASLAN SparkleColor SC 123 adheres well to most standard glass surfaces. However, it should not be applied to out-gassing surfaces, such as non-tempered acrylic, as bubbles may form, especially with short-term exposure to heat.

The surface of ASLAN SparkleColor SC 123 can be printed with UV-curable inks via flatbed printing. It is recommended to perform controlled print tests. Glitter particles should be blown away with compressed air beforehand and, if necessary, the height of the print heads should be adjusted. ASLAN assumes no liability for damage to the printheads or other printer components caused by glitter particles.

The recommended minimum application temperature for ASLAN SparkleColor SC 123 is 15°C (59°F). Applying the film at lower temperatures may affect adhesion.

Yes, in addition to the 14 standard colors, ASLAN offers 21 additional colors upon request, with a minimum order quantity of 500 linear meters.

Store the film in a cool, dry place away from direct sunlight and extreme temperatures. Proper storage will ensure that adhesive properties and overall quality are maintained until application.

ASLAN SparkleColor SC 123 is designed for direct application on smooth surfaces. It is not recommended to apply it over other materials as this may compromise adhesion and overall finish.

For best results, use application tools such as pullers designed for vinyl films. Make sure the surface is clean and free of dust, grease and oil before application to achieve the best adhesion and finish.