Yes, the film is designed for both indoor and outdoor applications, with an outdoor durability of up to 2 years under Central European climate conditions.

The LoopPET Metal CRA 31 is compatible with latex and UV-curable inks, ensuring high-quality print results.

The film is designed for dry application on smooth, flat surfaces. Wet application can reduce static electricity and aid positioning, but it is crucial to wipe out all water, as the PET base film does not allow moisture to pass through. ASLAN application tapes are recommended for applying lettering.

No, the ASLAN LoopPET Metal CRA 31 is only suitable for smooth, flat, non-elastic and non-curved surfaces. Application on curved surfaces may lead to adhesion problems and reduced aesthetics.

It is not advisable to apply the film to outgassing surfaces such as unhardened acrylic glass, as bubbles may form, especially with short-term exposure to heat.

Before application, the film can be stored for up to 2 years from the date of production. The film should be stored at room temperature (15-25°C) and a relative humidity of 50-60%. To avoid pressure points on the roll surface, it is recommended to store the rolls vertically or in specially designed racks.

Yes, the ASLAN LoopPET Metal CRA 31 is classified according to the flame retardant standard EN 13501-1: B - s1, d0, indicating a high degree of fire resistance.

The film is available in shiny silver and gold, creating a double-sided metallic effect ideal for applications on transparent surfaces such as glass or acrylic.

ASLAN LoopPET Metal CRA 31 should be applied at temperatures above 15°C (59°F) to ensure optimal adhesion and performance. Applying the film at temperatures below this threshold may result in suboptimal adhesion and affect the durability of the film.